How to Check Cosmetic Expiry Dates in Canada
Canadian cosmetic packs often show a PAO symbol, a best-before date or a batch code, but not always all three. Here is how to read them together.
Checking a cosmetic expiry date in Canada can feel confusing, because the pack may show a best-before date, a PAO symbol, a batch code, or a combination of these, and the rules are not identical to the rules in the United States or the United Kingdom. Many products sold in Canada are made for the North American market, while others are imported from Europe and carry European-style labelling. Knowing what each mark means, and where to look for it, helps you decide whether a product is still fresh, whether it is time to replace it, or whether you need to ask the brand for more information.
The rule that runs through every guide on this site applies here too: follow the printed EXP date and PAO symbol on your own pack first. Batch-code results are estimates based on publicly documented coding formats. They can tell you roughly when a product was made, but they do not override a date printed by the brand, and they do not tell you whether a product that has been stored badly is still good to use.
What Canadian labelling usually shows
Cosmetics sold in Canada must show certain information on the label, including the product name, the net quantity, the manufacturer's or distributor's name and address, and an ingredient list. They do not always have to show an expiry date in the same way a medicine does, but many brands add one voluntarily, and many imported products carry a PAO symbol or a best-before date because they were also made for the European or UK market. Sunscreens are a special case in Canada, because they are often treated as drugs or natural health products rather than simple cosmetics, so they are more likely to carry a clear expiry date. Always check a sunscreen's printed date first, and read our sunscreen expiry guide for what to look for.
Because Canada imports products from the US, Europe and Asia, you may see different date formats on different packs. A date may be written as month and year, as a full date, or as a code that only the brand can read. That is why it helps to check the whole pack, including the outer box, rather than looking for one single format. Our guide on batch code vs expiry date vs manufacture date vs PAO explains the difference between each of these marks.
Step 1: Look for a printed date
Start with the outer box, then the bottle, tube or jar. Look for EXP, Exp., Best Before, Use By, Use Before, or a month and year such as 03/2027. Check the bottom of the container, the back label, the crimped end of a tube and any sticker added by the retailer. The date may be printed in ink, stamped or embossed, and on dark or metallic packaging it can be hard to read, so tilt the pack under a light and run your fingertip over the surface to feel for raised characters.
Keep the outer box until you have finished the product, because the date is sometimes printed only on the box. If you find a printed date, note it down or take a photo of it with the batch code. If the date has passed, do not use the product, especially if it is a sunscreen, an eye product or a product you apply to broken or irritated skin. If there is no printed date, do not assume the product lasts forever. Move on to the PAO symbol and the batch code.
Step 2: Read the PAO symbol
The PAO symbol is a small open jar with a number and the letter M, for example 6M, 12M or 24M. It tells you how many months the product is intended to last after you first open it. A 12M symbol means about twelve months from opening, not from manufacture or purchase. You can work out the end date with our PAO calculator, or by adding the number of months to the month you opened it. Our PAO symbol guide explains the symbol in full.
The PAO symbol is common on products imported from Europe, including brands such as L'Oréal, Maybelline, Garnier, CeraVe and La Roche-Posay, and it appears on many products sold in Canadian pharmacies and drugstores. If your product has both a printed expiry date and a PAO symbol, follow whichever comes first after opening. Writing the opening month on the base of the product with a small sticker or marker makes this much easier to remember, especially for slow-use products such as face cream or foundation.
Step 3: Find and check the batch code
The batch code, also called a lot code, is a short string of letters and numbers that identifies the production batch. It is not the barcode. It is usually found near the bottom of the container, on the back, or on the crimped seal of a tube. Our guide on how to find a batch code shows the usual places to look for bottles, tubes, jars and compacts.
Enter the code in the batch code checker, choosing the correct brand, to get an estimated manufacture date. Then use the expiry calculator to turn that into a rough age estimate. Remember that this is an estimate. Some brands reuse codes, some formats repeat every ten years, and some codes cannot be decoded from public information. See why one batch code can mean two years and batch code not found for the common reasons a code may not decode. A batch code also does not prove a product is genuine, as explained in our authenticity guide.
| What you find on a Canadian pack | What it means | What to do |
|---|---|---|
| Printed EXP or best-before date | The brand's own date for that product | Follow it; do not use the product after it |
| PAO symbol, for example 12M | Months after first opening | Count from the month you opened it |
| Batch code only | Production batch identifier | Check it for an estimated manufacture date |
| Drug Identification Number on sunscreen | The product is regulated as a drug | Follow its printed expiry date strictly |
| No date, no PAO, no readable code | Not enough information on the pack | Judge by condition and ask the brand |
Step 4: Check the product itself and how it was stored
Dates and codes are only part of the picture. A product that has been left in a hot car in a Canadian summer, in a freezing garage in winter, or in a steamy bathroom can go off sooner than its label suggests. Check for a smell that has changed or turned sharp, a texture that has separated, gone grainy or become watery, a colour that has darkened, and a product that no longer applies smoothly. Our guide on how to tell if makeup is expired covers these signs, and how long cosmetics last gives typical times after opening. Eye products need extra care: mascara is usually replaced after about three months, as explained in mascara shelf life. If a product looks or smells wrong, stop using it even if the date has not passed. See how to store cosmetics for storage tips that suit Canadian homes, including dry winter heating and humid summers.
Buying cosmetics in Canada: choosing fresh stock
When you shop in Canada, buy from a well-known pharmacy, drugstore, department store or the brand's own shop or website, where stock usually turns over regularly. Check the pack before you pay, and check the date again as soon as an online order arrives. Avoid packs that are dusty, faded, dented or missing a seal, and be careful with deep discounts on products that are close to their date. If you buy from a marketplace or resale seller, check the seller's reviews and return policy, and be wary of prices far below the usual price.
Canada's bilingual labelling means you may see French as well as English on the pack. Look for Date d'expiration, Meilleur avant, or the PAO symbol, which looks the same in both languages. If you cannot find a date or a readable batch code, or if a batch-code result looks surprising, contact the brand's Canadian customer care team. Keep the batch code, the barcode, the product name and shade, and a photo of the pack, and follow the steps in how to ask a brand about a batch code.
Frequently asked questions
Do cosmetics sold in Canada always have an expiry date?
No. Many cosmetics sold in Canada do not have to show a single expiry date, although many brands add one, and imported products often show a PAO symbol or a best-before date. Sunscreens are more likely to show a clear expiry date because they are regulated differently.
What should I do if my Canadian product has no date at all?
Check the PAO symbol and the batch code, note when you opened the product, and judge it by smell, texture and colour. If you are still unsure, contact the brand with the batch code and a photo of the pack.
Is the PAO symbol used in Canada?
Yes, it appears on many products sold in Canada, especially those imported from Europe or made by international brands. Where it is printed, it is a useful guide to how long the product should last after opening.
How do I check a batch code for a product bought in Canada?
Find the batch code on the pack, choose the correct brand on the batch code checker, and enter the code exactly as printed. The result is an estimated manufacture date. Use the expiry calculator for a rough age, and always follow the printed EXP date and PAO symbol on your own pack first.
Always follow the printed EXP date and PAO symbol on your own pack. Batch-code results on this site are estimates, not a substitute for the date printed by the brand.