How to Check Cosmetic Expiry Dates in the UK
UK cosmetic packs usually show a PAO symbol and often a best-before date. Here is how to read them, check a batch code and decide when to replace a product.
If you buy cosmetics in the UK, the pack usually gives you more date information than a pack bought in the United States. UK rules require clear information about how long a product lasts, and most packs show either a best-before date or a period-after-opening (PAO) symbol, and often both. Once you know where to look and what each mark means, checking a cosmetic expiry date in the UK becomes a quick routine you can do in under a minute.
As with every guide on this site, the first rule is the same: follow the printed EXP date and PAO symbol on your own pack. Those marks are specific to your product. Batch-code results are estimates based on publicly documented coding formats, and they are a helpful second check, not a replacement for the date the brand printed. If a printed date and a batch-code estimate disagree, trust the printed date.
What UK labelling usually shows
Under UK cosmetic rules, a product must show either a best-before date or, for products that last more than 30 months unopened, a PAO symbol. The best-before date is usually written as a month and year, for example 06/2027, and it may be shown with an hourglass symbol or the words Best Before or Best Before End. The PAO symbol is a small open jar with a number and the letter M, such as 6M, 12M or 24M, and it tells you how many months the product is intended to last after you first open it. Our PAO symbol guide explains the symbol in detail, and our batch code vs expiry date guide explains how the different marks fit together.
Many UK packs show both a best-before date and a PAO symbol. In that case, follow whichever comes first once the product is opened. A product with a best-before date of 2028 and a 12M PAO symbol should be used within twelve months of opening, even though the best-before date is further away. The best-before date applies mainly to the unopened product, while the PAO period starts the day you first use it.
Step 1: Find the printed date
Check the outer box first, then the container itself. Look on the bottom, the back label, the crimped end of a tube and any printed sticker. The date may be printed in ink, stamped or embossed, and on dark packaging it can be hard to spot, so tilt the pack under a light and feel for raised characters with your fingertip. Keep the outer box until you finish the product, because the date is sometimes printed only on the box.
Be careful with two similar-looking numbers. The batch code is not the expiry date, and the barcode number is not the expiry date either. The expiry or best-before date is usually labelled with words such as EXP, Best Before or Use By, or shown beside a small hourglass symbol. If you are not sure which number is which, our guide on how to find a batch code shows where batch codes usually sit and what they look like.
Step 2: Read the PAO symbol and note when you opened it
Find the open-jar symbol and note the number. A 6M symbol means about six months after opening, 12M means about twelve months, and 24M means about twenty-four months. Work out the end date by adding that number of months to the month you opened the product. Our PAO calculator does this for you if you enter the opening date and the PAO number.
The easiest way to remember the opening date is to write it on the base of the product when you first use it, with a small sticker, a permanent marker or a label. This is especially useful for products you use slowly, such as a face cream, a foundation or a perfume, where months can pass without you noticing. If you have already opened a product and you do not remember when, be honest with yourself about how long it has been in use, and judge it by its smell, texture and colour as well as the date. See how to tell if makeup is expired and how long cosmetics last for typical times after opening for common products.
Step 3: Check the batch code
The batch code is a short code of letters and numbers that identifies the production batch. It is usually printed near the bottom of the bottle or jar, on the back, or on the crimped end of a tube. Enter it in the batch code checker, choosing the correct brand, to get an estimated manufacture date. That is useful when a product has no printed date, when the date is worn away, or when you want to check how old a product was when you bought it.
Popular UK brands you can check include L'Oréal, Maybelline, Garnier, CeraVe, Clinique, Olay, La Roche-Posay and Vichy. Use the expiry calculator to turn an estimated manufacture month into a rough age. Remember that the result is an estimate: some brands reuse codes, some formats repeat every ten years, and some codes cannot be decoded from public information. Our guide on why one batch code can mean two years explains the ten-year repeat problem, and batch code not found explains what to do when a code is not recognised.
| Mark on a UK pack | What it means | What to do |
|---|---|---|
| Best-before date, for example 06/2027 | Date the unopened product is best used by | Do not use it after this date if it is still unopened |
| PAO symbol, for example 12M | Months after first opening | Count from the month you opened it |
| Hourglass symbol with a date | Best-before date for that product | Follow the date shown |
| Batch code only | Production batch identifier | Check it for an estimated manufacture date |
| EXP date on sunscreen | Expiry date for sun protection | Follow it strictly; do not rely on old sunscreen |
Step 4: Check the product itself
Even a product that is inside its date can go off early if it has been stored badly. Heat, sunlight, damp and dirty fingers can all shorten its life. Check for a smell that has changed or turned sharp, a texture that has separated, gone grainy or become watery, a colour that has darkened, and a product that no longer spreads or performs as it did. Eye products deserve the most care: mascara is usually replaced after about three months, as explained in mascara shelf life. If a product looks or smells wrong, stop using it, even if the date has not passed. Practical storage advice is in how to store cosmetics.
Buying cosmetics in the UK: choosing fresh stock
When you shop in the UK, check the pack before you pay, whether you are in a high-street shop, a pharmacy or a supermarket. Look for the best-before date and the PAO symbol, and avoid packs that are dusty, faded or damaged, or that are missing a seal the product should have. Be careful with heavily discounted products that are close to their best-before date, and check the date as soon as an online order arrives, not months later when you open it. If you buy from a marketplace seller, check the seller's reviews and return policy, and be wary of prices that look far below the usual price. A batch code alone does not prove a product is genuine, as explained in our authenticity guide.
If the date is missing or unreadable, or the batch code gives a surprising result, contact the brand. Keep the batch code, the barcode, the product name and shade, and a clear photo of the pack, and follow the steps in how to ask a brand about a batch code. Many brands can confirm the manufacture date from the batch code.
Frequently asked questions
Do all UK cosmetics have an expiry date printed on them?
Not exactly. UK packs must show either a best-before date or a PAO symbol. Products that last more than 30 months unopened usually show a PAO symbol instead of a best-before date. Either way, the pack should give you a clear way to judge how long the product lasts.
What does the hourglass symbol mean on a UK cosmetic?
The hourglass symbol is used with a best-before date. It means the product should be used by the date shown beside the symbol. It is another way of showing the same kind of date as Best Before.
How do I work out the PAO date for a UK product?
Add the number in the PAO symbol to the month you first opened the product. For example, a 12M product opened in January should be used by the following January. Use the PAO calculator to work it out, and write the opening month on the pack.
Can I check a batch code for a UK product on this site?
Yes, if the brand is supported. Find the batch code, choose the brand on the batch code checker, and enter the code exactly as printed. The result is an estimated manufacture date, not a printed expiry date, so always follow the printed EXP date and PAO symbol on your own pack first.
Always follow the printed EXP date and PAO symbol on your own pack. Batch-code results on this site are estimates, not a substitute for the date printed by the brand.