Guide

How to Check Cosmetic Expiry Dates in the USA

US cosmetic packs do not always show a simple expiry date. Here is how to read what is printed, use the PAO symbol and check a batch code.

Checking a cosmetic expiry date in the United States is not always as simple as looking for a date printed on the box. Unlike food or medicine, most cosmetics sold in the US are not required by federal law to carry an expiry date, so the information you need is often spread across several places on the pack: a printed date if the brand chooses to add one, an open-jar symbol, a batch code, and the general condition of the product itself. Learning to read all of these together gives you a much clearer picture than relying on any single mark.

The first rule is the simplest and the most important. If your product has a printed EXP date, a best-before date or a use-by date, follow that date. It is the brand's own instruction for that product, and it takes priority over any estimate from a batch-code checker, a general shelf-life chart or a friend's advice. Batch-code results on this site are estimates based on publicly documented coding formats, and they should never override a date printed on your own pack. The same applies to the PAO symbol, which is explained in our PAO symbol guide.

What US law does and does not require

In the US, cosmetics are regulated by the Food and Drug Administration (FDA), and the rules are different from the rules in the European Union and the UK. A US cosmetic does not have to show an expiry date, a manufacture date or a period-after-opening symbol to be sold legally, although many brands add one or more of these voluntarily. Some products are treated differently: sunscreens, for example, are regulated in the US as over-the-counter drugs, so they usually do carry an expiry date, and that date matters because the sun-protection ingredients can lose strength over time. If you buy a sunscreen in the US, check its printed expiry date first and read our sunscreen expiry guide for what to look for.

Because there is no single US rule, the same brand can label a product differently depending on where it was made and where it was intended to be sold. A product made for the European market may show a PAO symbol, while the US version of a very similar product may not. That does not necessarily mean the product is older or less safe; it often just reflects different labelling rules. It does mean you should not assume that the absence of a date means the product lasts forever. It means you need to look for the other clues on the pack.

Step 1: Look for a printed date on the pack

Start with the outer box, then the bottle, tube or jar itself. Look for the words EXP, Exp., Best Before, Use By, Use Before or a date written as month and year, such as 03/2027 or Mar 2027. Check the bottom of the container, the crimped end of a tube, the back label and any sticker added by the retailer. Keep the outer box until you have finished the product, because the date is sometimes printed only on the box and not on the container inside.

If you find a printed date, write it down or take a photo of it, along with the batch code. If the date has passed, do not use the product, especially if it is a sunscreen, an eye product or anything you apply to broken or irritated skin. If there is no printed date, move on to the next step rather than guessing from the purchase date alone. A product can sit in a warehouse or on a shop shelf for months before you buy it, so the day you bought it is not the day it was made.

Step 2: Read the PAO symbol

The PAO symbol is a small picture of an open jar with a number and the letter M inside or beside it, for example 6M, 12M or 24M. It tells you how many months the product is intended to last after you first open it. A 12M symbol means about twelve months from opening, not twelve months from manufacture and not twelve months from purchase. You can work out the date by adding the number of months to the month you opened it, and our PAO calculator does that arithmetic for you.

The PAO symbol is common on products made for Europe and the UK, and it appears on many products sold in the US too, particularly from international brands such as L'Oréal, Maybelline, Garnier and CeraVe. If your product has both a printed expiry date and a PAO symbol, follow whichever comes first. For example, if the PAO period ends in six months but the printed expiry date is in two years, the PAO date is the one to use after opening. If you are not sure when you opened a product, write the opening month on the base with a small sticker or a permanent marker when you first use it.

Step 3: Find and check the batch code

The batch code, sometimes called a lot code, is a short string of letters and numbers printed, stamped or embossed on the product, usually near the bottom, on the back, or on the crimped seal of a tube. It is not the barcode, which is the longer striped number used at the till. Our guide on how to find a batch code shows the usual places to look for different types of packaging.

Once you have the code, enter it in the batch code checker on this site, choosing the correct brand. If the brand is supported, the checker will estimate the manufacture month from the code. That gives you a starting point: you can then use the expiry calculator to add a typical shelf life and see a rough estimate of when the product may have been made and how old it is. Remember that this is an estimate, not a guarantee. Some brands reuse codes, some formats are shared between brands, and some codes cannot be decoded at all. If the checker cannot recognise your code, read why a batch code may not be found before assuming the product is fake or expired. A batch code alone does not prove a product is genuine, as explained in our authenticity guide.

What you find on a US packWhat it meansWhat to do
Printed EXP or use-by dateThe brand's own expiry dateFollow it; do not use the product after it
PAO symbol, for example 12MMonths the product should last after openingCount from the month you opened it
Batch code only, no dateA code for the production batchCheck it on this site for an estimated manufacture date
No date, no PAO, no readable codeNot enough information on the packJudge by smell, texture and colour, and ask the brand
Sunscreen with a printed dateExpiry date for a drug productFollow it strictly and store it away from heat

Step 4: Check the product itself

Dates and codes are useful, but your senses are a practical second check. Our guide on how to tell if makeup is expired covers the usual signs: a smell that has changed or turned sharp or rancid, a texture that has separated, gone grainy, become watery or thickened, a colour that has darkened or changed, and a product that no longer applies smoothly or no longer works as it did. Mascara and liquid eyeliner deserve extra care, because they are used near the eyes and are usually replaced after about three months; see mascara shelf life and how long cosmetics last for typical times after opening.

If a product looks, smells or feels wrong, stop using it even if the printed date has not passed yet. Heat, sunlight and damp storage can shorten a product's life, and a product that has been left in a hot car or a steamy bathroom may go off sooner than the label suggests. Read how to store cosmetics for practical storage tips that help products last as long as they should.

Buying cosmetics in the US: how to choose fresh stock

When you shop in the US, buy from the brand's own shop or a well-known retailer where stock turns over regularly, and check the pack before you pay. Look for a printed date and a PAO symbol, and avoid packs that are dusty, faded, dented or missing their seal if the product should have one. Be cautious with deep discounts on products that are close to their date, and be careful with resale or marketplace sellers where you cannot check the pack first. If you shop online, check the seller's return policy before you order, and check the date as soon as the product arrives rather than months later when you finally open it.

If you cannot find a date or a readable batch code, or if the code gives a surprising result, you can contact the brand directly. Keep the batch code, the barcode number, the product name and shade, and a photo of the pack, and use the steps in how to ask a brand about a batch code. Brands can often confirm the manufacture date from the batch code even when public checkers cannot.

Frequently asked questions

Do all cosmetics sold in the USA have an expiry date?

No. Most cosmetics sold in the US are not required to show an expiry date, although many brands add one voluntarily. Sunscreens usually do show one because they are regulated as drugs. If there is no printed date, check the PAO symbol and the batch code, and judge the product by its condition.

Can I use a cosmetic after its printed expiry date in the US?

It is best not to. The printed date is the brand's guidance for that product, and using a product after it, especially sunscreen or an eye product, is not worth the risk. When in doubt, replace it.

Does the PAO symbol apply in the USA?

The PAO symbol is a European labelling system, but it appears on many products sold in the US, especially from international brands. Where it is printed, it is a useful guide to how long the product should last after opening, counted from the month you first open it.

How do I check a batch code for a US product?

Find the batch code on the pack, choose the correct brand on the batch code checker, and enter the code exactly as printed. The result is an estimated manufacture date. Use the expiry calculator to turn that into a rough age estimate, and always follow the printed EXP date and PAO symbol on your own pack first.

Always follow the printed EXP date and PAO symbol on your own pack. Batch-code results on this site are estimates, not a substitute for the date printed by the brand.

Related guides

Try the batch code checker, the expiry calculator or the PAO calculator.